??真人博狗??

Yan Fu Product Categories

Contact: 15261998288 (Manager Wang)
13770011330 (Manager Lin)
Phone: 0515-80616558
Fax: 0515-80616658
After-sales service: 0515-86358288
Email: jsyfhb@163.com

Powder Sorter Series

Your current location : ??真人博狗??> Products

Gravel dedicated unpowered classifier

First, the principle structure Gravity inertia classifier uses air flow, gravity and airflow direction changes to achieve 0-5mm material classification. These devices combine gravity, inertia, centrifugal force, and aerodynamics to classify materials with particle sizes between 0-5mm. Feed and primary air enter the classifier from the top down. The airflow changed direction by 120 degrees and carried the fine particles through the blades and left the classifier. Coarse particles that cannot be turned by the air flow due to their own gravity fall to the bottom of the classifier and are discharged through a valve. The secondary air blown in from the lower part of the blade is forced to pass through the falling particle curtain. These coarse particles near the classification point are diverted by the secondary air flow and enter the vortex of the heart-shaped chamber. The fine particles captured when entering the classifier and other particles dragged from the vortex are taken into the dust collector (dust collector) by the outlet air for final recovery. The secondary air throttle has a simple manual adjustment function that can change the classification size of fine particles. Within the range of the material flow, there are no moving parts, so maintenance is required ****. For abrasive materials, liners are used in certain areas to ensure longer equipment life.

Function: It is used to sort the dust content in the materials below 0-5mm, and the dust content can be controlled less than 1%.
1. Convenient adjustment. There are 4 adjusting parts, namely material fall control, primary air inlet control, secondary air inlet control, and air outlet volume control, which can control the air volume and powder content of the finished product very conveniently.
2. Power saving. The previous configuration plan was to add dust to the separator. Now this model has no motor. The main power is reflected in the dust collector, which can save electricity.
3, the structure is simple, the main material contact parts are few, the wear parts are all used in our company's self-developed wear-resistant treatment, the use of wear is small; maintenance-free, low maintenance costs

??真人博狗??ProductsProjectsCaseNewsTechnical ExchangeAbout YanfuContact Us
欢乐拼三张 七乐彩 真人游戏平台注册 欢乐拼三张